PHS FUSION OPTIMA VARIO 85/15 TAPE 25m ROLL

Code: DAFAWFOV10025M
Barcode: 509098909801|5391536370022|
60.00 Inc. VAT

In Stock



PHS Fusion Variable Plus Window tape is a special full adhesive for fast and reliable sealing of window and door reveals. PHS Fusion Variable Plus Window Tape protects against interstitial condensation by having a variable (humidity dependent) sd membrane value. In the winter the tape becomes more vapour closed (Sd = 6.6m) to prevent moisture travelling into the building fabric and condensing within the joint. In the summer the tape becomes more vapour open (Sd = 0.1m) to allow any moisture that infiltrated the wall in the winter to escape. The same PHS Fusion Variable Plus Window Tape is usable for internal and external sealing, offering excellent levels of vapour control either way and easier stock management. The underside of the self-adhesive tape is full-surface coated with an aggressive high tack adhesive. This allows application even at low temperatures. The split cover foil on this self-adhesive layer allows particularly easy and time saving application. PHS Fusion Variable Plus may be also plastered and painted over and is fully concealed after installation. Adhesive: Modified acrylate dispersion, solvent-free Processing temperature: From -5C, ideal processing temperature +5C to +35C Temperature resistance: -40C bis +80C, storage at 15-25C with rH 40-60% Carrier Material: Special film with non-woven PP lamination UV Resistance: 3 months Properties: moisture-variable sd 0,4-20m Tensile strength: Alongside 190-40/+80, crosswise 150-30/+60, N/50mm Elongation at tear: Alongside 100-30/+60, crosswise 150-50/+100, value in % Watertightness: W1 in regards to EN 1928 Size: 55/15(70mm) X 25m 85/15(100mm) X 25m 15/75/60(150mm) X 25m 15/75/110(200mm) X 25m Box Quantity: 6 4 2 2 *Other dimensions available on request. Application: - The bonding surfaces must be smooth, dry, free of oil, grease and dust, firm and stable. - The reveals have to be smoothed out according to DIN 4108, part 7, for installation of PHS Fusion. - In low temperatures ensure that all bonding surfaces are free of any frost and ice. - Application surface may require priming with PHS Primer, e.g. for solidification of sandy surfaces. - Application at 0 to -10˚C will reduce initial adhesion, although application is possible at such temperatures, high final strength will need longer contact time. Fitting Instructions: - Measure and cut PHS Fusion Variable Plus to length with at least 5cm to spare. - Peel the cover foil off the self-adhesive strip and press the strip to the back of the window frame. Proceed in this way on all sides of the window frame to be sealed. - The split protective foil on the full-surface self-adhesive layer is peeled off as required and the tape carefully pressed onto the reveals substrate. Ensure that the tapes overlap in the corners. - Use a pressure roller to achieve optimal initial adhesion. Optima Tape onto Masonry surface: The masonary must be smooth dry and dust free. Surface must first be prepared by applying a coat of PHS Primer. Let the primer dry and test the tape adhesion before proceeding with the full tape application.

Sign up for our newsletter

We only use your email address to add you to our mailing list for receiving our newsletters(monthly). This information is only kept in our mailing list and not for any other purposes than for contacting you with our newsletters.

Thank you for your submission! You will hear from us soon.